Honda Clutch Cover Guard
Honda Clutch Cover Guard
Honda CR125 Clutch Cover Guard
Honda CRF450 Clutch Cover Guard
Honda CR250 Clutch Cover Guard

Honda Clutch Cover Guard "CR"

Regular price $15.00 Save $-15.00

Only -4 items in stock!

What Do They Do?

  • Protects the coating or metal on your clutch cover
  • Adds grip
  • Covers up a worn looking cover
  • Gives your bike a clean look

What Are They?

These are thick vinyl protectors that have a very strong adhesive backing. They apply easily but don't add bulk to your engine cover. These are not made from sandpaper type material, so they will not wear down your boots and riding gear.

Available in one guard or a pack of 3 to save you cash!

Keep in mind, these guards do not last forever. The lifetime of them depends on the care taken while installing, as well as your riding style. Protecting your engine covers with guards is much cheaper and easier than refinishing your covers every few months due to wear and tear on the coatings/metal.

Image may not be an exact representation of the guard for your model, but you will receive the correct guard for your bike.

Related Items


  • Made from 0.7mm thick vinyl
  • Extreme high adhesion allows guards to stay in place
  • Textured finish provides grip between rider and bike
  • Perfect fit ensures edges do not peel up prematurely
  • Features a corner guard, which prevents peeling in high wear areas
  • Adheres to aluminum, steel, plastic, powder coat, and cerakote
  • 100% made in the USA!

Some guards may have a cutout around raised lettering, such as on CR125 models. These only fit on stock clutch covers.

When installing your sticker or decal, keep these pointers in mind to ensure a good secure adhesion.

  • Clean surface with contact cleaner or isopropyl alcohol beforehand
  • To avoid touching adhesive, only peel backing paper halfway so you can hold onto the other side while installing decal
  • Use your thumb or a credit card to press the decal into place
  • Work from one side to the other, or from the center to the edges to ensure there are no air bubbles left behind
  • Install decals in warm weather, for cold applications use a hair dryer or heat gun to ensure maximum adhesion

On clear or transparent decals, make sure you do not touch the adhesive. Ensure there are no scratches or marks where you're installing it since those will show through. Transparent decals require a warm day or help with a heat gun to acheive a fully transparent installation.

If you use a pressure washer to clean your vehicle, stay at least 20 inches away from decals.

How To Install Guards

Getting Started

  • Have a heat gun or hair dryer on hand.
  • Do not use any type of water, windex, or soap solution while installing guards.
  • Install guards in a warm area to help them adhere and conform better.

Guard Installation

  • Remove any glue, dirt, or grease from frame or cover.
  • Clean surface with isopropyl alcohol or contact cleaner, and let dry.
  • Use a heat gun or hair dryer to warm up the surface and guard if temperature is below 60F.
  • Peel part of the paper backing away, and line up guard at the most detailed part.
  • Be sure not to touch the part surface or adhesive with your bare hands.
  • Once you are happy with the alignment, tack the guard down at the center and work your way from the center towards the edges.
  • If the guard is off center or an air bubble starts to form, you can carefully peel up the guard to correct.
  • As you get to the edges and tighter spots, creases may start to form. Add a small amount of heat to stretch the guard so it lays flat.
  • Do not apply excessive heat, as this may melt the guard.
  • If your cover or frame has tight crevices, use a soft rubber or plastic edge to help press the guard into those spots.
  • Once the guard is fully tacked in place, heat the guard again while applying pressure. This is very important to the adhesion of the guard, so make sure you don't skip this step.

Getting The Most Out Of Your Guards

  • When installing the guard, make 100% sure the surface is clean and the edges are not hanging off the part.
  • It is not recommended to use boots with steel toe caps, as this will wear out guards much quicker.
  • If you notice an edge start to peel up, apply heat and tack it back down or lightly trim the edge.
  • If using a pressure washer to clean your bike, take caution around the guards.

Removing Old Guards

  • Before removing a worn guard, apply heat to help soften up the adhesive, this will also prevent adhesive from being left behind.
  • If adhesive is left afterwards, tack the old guard over the adhesive and this will help peel it up. Use a contact cleaner or isopropyl alcohol to remove any leftover adhesive.

Tags: Grip Tape, Frame Tape, Engine Tape, Clutch Cover Guard, Flywheel Cover Guard, Ignition Cover Guard, Engine Cover, Frame Grip, Engine Grip, Frame Covers, Engine Guard

Pryme ships to any country in the world, please add your items to the shopping cart to see shipping rates.
U.S orders over $150 ship free!
Handling Time Orders ship out within 1 business day of receiving cleared payment. We do not ship on Sundays or holidays.
    International Buyers are responsible for any import duty or taxes. To estimate the import duty for your country, use this calculator. Sorry, we cannot mark the value of the package down or send it as a gift. Occasionally, packages may be held up in customs for a period of days or weeks.

      Tracking Information Tracking numbers will be uploaded to the order page and sent to your email inbox. It may take up to 24 hours for the tracking page to show the most recent information.

      We are not to be held responsible for stolen or lost packages, packages sent to the wrong address, or refunding/replacing packages in these scenarios. It is the customer's responsibility to file all shipping claims.

        Returns We accept returns within 14 days after your item has been delivered. If 14 days have gone by since your item was delivered, unfortunately we cannot offer you a refund. To initiate a return please send us an email at To be eligible for a return, your item must be in the same condition that you received it. The item must be unused / unworn and original tags attached. No returns allowed on sale/clearance items.

        Refunds Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. Your refund will be processed and a credit will automatically be applied to your credit card or original method of payment, within 7 days. 

        Late or Missing Refunds If you haven’t received a refund for your return yet, first check your bank account. Then contact your credit card company, it may take some time before your refund is officially posted. If you’ve done all of this and you still have not received your refund yet, please contact us at

        Shipping Costs You will be responsible for paying the return shipping costs of your item. Additionally, the original shipping costs will not be refunded.

        Exchanges If you need to exchange an item, please see our refund policy above and include exchange instructions with the return. We do not offer exchanges on out of stock items. If the item is out of stock then we will refund you instead. The buyer is responsible for all shipping costs on exchanges.

        Incorrect or Defected Item If we made a mistake with your order, please contact us at We will provide a return label if an exchange needs to be made. You must notify us within 14 days of delivery of any defects with the item. Any claims past 14 days will be considered wear and tear, and cannot be replaced.

        Customer Reviews

        Be the first to write a review

        You may also like

        Customer Reviews

        Be the first to write a review