Mini Flap Wheel Pack
Removing scratches and corrosion has never been easier! If you're going for a custom look, the Pryme flap wheels work great for sanding away casting lines too. The mini flap wheel pack includes (1) 3/4 inch wheel and (1) 3/8 inch wheel.
- Perfect for sanding in tight areas or inside of a tube bore
- Best used for removing scratches, scrapes, corrosion, dirt staining, and blending in casting marks
- Leaves behind a brushed look, can be further finished with Pryme Cleaning Wheels
- Offered in 80 grit, 120 grit, and 240 grit (use 80 and 120 for sanding out scratches and 240 for a smoother finish)
- Best for aluminum, but can be used on steel, stainless steel, and brass with great results too
- Made in Germany
3/4 Inch Wheel Specs:
- 3/4" diameter x 3/4" wide x 1/8" shaft (best used on a Dremel tool, but could be used on a drill with decent results)
- Optimal RPM: 19,000
- Max RPM: 38,100
3/8 Inch Wheel Specs:
- 3/8" diameter x 3/8" wide x 1/8" shaft (best used on a Dremel tool, but could be used on a drill with decent results)
- Optimal RPM: 30,000
- Max RPM: 40,000
Always wear a respirator and proper eye protection while using wheels!
Tags: Cleaning, Pad, Wheel, Scuff, Scotch, Abrasive, Sanding, Flap, Drum, 3/4, Dremel Attachment, Buff, Buffing
These are designed to be used on a Dremel rotary tool, or could be used on a drill as well. The best results will come with them on a Dremel.
The Dremel tool I recommend Click Here
Some cheaper alternatives:
Avid Rotary Tool Click Here
Tacklife Rotary Tool Click Here
Lastly, whenever you're doing any sort of grinding or sanding you'll want to use eye and respiratory protection. Trust me, you do not want to be breathing in metal particles!
A great product for protecting yourself is this respirator Click Here
Alternatively, this is also a great respirator to pair up with safety glasses Click Here
Use these filters with the previously mentioned respirators Click Here
If you're doing lots of buffing, I'd recommend getting some sort of ventilation like this exhaust fan that I use Click Here
And of course, always a good idea to wear gloves Click Here
- Make sure you have an 1/8" size collet for your die grinder.
- Slide the shaft of the wheel into tool and tighten lock nut.
- Always sand or buff in the same direction, try to buff in the length of the part. Intersecting scratches do not look good.
- Use light pressure with the wheel or you'll wear it out prematurely. If you need to apply heavy pressure, you’ll need to go to a more aggressive wheel.
- Buffing against the direction the wheel is spinning will cut quicker, buffing with the spinning of the wheel will give a smoother finish.
- In order to make the wheels last as long as possible, stay away from sharp edges. The direction of the wheel should be spinning away from an edge and not towards it. Adjust the orientation of the part accordingly.
- To achieve a consistent brushed look on larger parts, follow up with a fine cleaning wheel either by hand or on a machine.
- Always wear a respirator and eye protection when using the wheels!
Not sure what wheel you need? Use the Wheel Guide
I got theses wheels to try and clean up some bike parts and I was surprised to how well they work! Just like in the video, they clean the parts of surface deposits and bring them to a nice finish! Time to order more!!