Flap Wheel - 3/4 Inch

  • Sale
  • Regular price


Removing scratches and corrosion has never been easier! If you're going for a custom look, the Pryme flap wheels work great for sanding away casting lines too.

  • Perfect for sanding in tight areas or inside of a tube bore
  • Best used for removing scratches, scrapes, corrosion, paint, dirt staining, and blending in casting marks
  • Leaves behind a brushed look, can be further finished with Pryme Cleaning Wheels
  • Offered in 80 grit, 120 grit, and 240 grit (use 80 and 120 for sanding out scratches and 240 for a smoother finish) 
  • 3/4" diameter x 3/4" wide x 1/8" shaft (best used on a Dremel tool, but could be used on a drill with decent results)
  • Optimal RPM: 19,000
  • Max RPM: 38,100
  • Best for aluminum, but can be used on steel, stainless steel, and brass with great results too
  • Sold individually, or in packs of 3 and 10
  • Made in Germany

 

-To make wheels last as long as possible, stay away from sharp edges. Use rougher grit for more aggressive removal, and finer grit for smooth finish.
-Dremel not included
-Always wear a respirator and proper eye protection while using wheels!
-Not sure what wheel you need? Use the Wheel Chart
-Refer to the Buffing Machine Guide for info on what machine/tool you'll need for these wheels

Check out the video below of the wheels in action.

 

Tags: Cleaning, Pad, Wheel, Scuff, Scotch, Abrasive, Sanding, Flap, Drum, 3/4, Dremel Attachment, Buff, Buffing