Fine Point Cleaning Wheel
Restore and keep up on that shine with a Pryme fine point cleaning wheel.
- Perfect for cleaning in tight areas or inside of a tube bore
- Achieves a brushed type finish, use the Flap Wheels for scratch removal and shaping
- Cleans the surface with very little material removal
- Comparable to 180 grit sandpaper
- Only use in tight areas and crevices, use a larger wheel for more open surfaces
- 3/8" diameter x 3/4" long tip x 1/8" shaft (best used on a Dremel tool, but could be used on a drill with decent results)
- Max RPM: 64,000
- Best for aluminum, but can be used on steel, stainless steel, and brass with great results
- Made of silicon carbide material
- Sold individually, or in packs of 3 and 10
- Proudly made in the USA
Always wear a respirator and proper eye protection while using wheels!
These are designed to be used on a Dremel rotary tool, or could be used on a drill as well. The best results will come with them on a Dremel.
The Dremel tool I recommend Click Here
Some cheaper alternatives:
Avid Rotary Tool Click Here
Tacklife Rotary Tool Click Here
Lastly, whenever you're doing any sort of grinding or sanding you'll want to use eye and respiratory protection. Trust me, you do not want to be breathing in metal particles!
A great product for protecting yourself is this respirator Click Here
Alternatively, this is also a great respirator to pair up with safety glasses Click Here
Use these filters with the previously mentioned respirators Click Here
If you're doing lots of buffing, I'd recommend getting some sort of ventilation like this exhaust fan that I use Click Here
And of course, always a good idea to wear gloves Click Here
- Make sure you have an 1/8" size collet for your die grinder.
- Slide the shaft of the wheel into tool and tighten lock nut.
- Always sand or buff in the same direction, try to buff in the length of the part. Intersecting scratches do not look good.
- Use light pressure with the wheel or you'll wear it out prematurely. If you need to apply heavy pressure, you’ll need to go to a more aggressive wheel.
- Buffing against the direction the wheel is spinning will cut quicker, buffing with the spinning of the wheel will give a smoother finish.
- In order to make the wheels last as long as possible, stay away from sharp edges. The direction of the wheel should be spinning away from an edge and not towards it. Adjust the orientation of the part accordingly.
- To achieve a consistent brushed look on larger parts, follow up with a fine cleaning wheel either by hand or on a machine.
- Always wear a respirator and eye protection when using the wheels!
Not sure what wheel you need? Use the Wheel Guide
A really neat product for getting your bike looking great. Defiantly nothing like it any where else.
This is my second order from Cameron and these wheels continue to amaze me! I’m actually going back and redoing parts I’ve already completed because I can get a nicer finish with these wheels. I will NEVER be without a supply of these in my toolbox again!