- Description
- Videos
- Fitment
- How To Use
Open up a new world of cleaning possibilities with a pack of adapters. These adapters allow you to mount a cleaning wheel onto your dremel, die grinder, or drill.
- Includes template for creating your own size wheels out of worn down cleaning wheels
- Template has 1", 1.5", 2", and 2.5" sizes
- All adapters are made with steel for excellent durability
Dremel Adapter Specs:
- 1/8" diameter shaft (designed to be used with a Dremel rotary tool)
- 2" long shaft
- Machined from 303 stainless steel
- Includes stainless low profile mounting screw, so you won't be bumping into your workpiece with the screw head
- Max RPM: 35,000
Die Grinder Adapter Specs:
- 1/4" diameter shaft (designed to be used with an air die grinder)
- 2.25" long shaft
- Machined from 303 stainless steel
- Includes stainless low profile mounting screw, so you won't be bumping into your workpiece with the screw head
- Max RPM: 35,000
Drill Adapter Specs:
- Compatible with wheels that have a 1/2" center hole (use wheels smaller than 6" diameter)
- Includes adapter shaft, 2 nuts, and two washers
- 1/4" diameter shaft, 1/2" diameter thread
- 2.5" overall length
- 1.25" thread length
- Max RPM: 6,000
Does not include wheels or tool. Do not use with wheels thicker than 1/2". Meant to be used with worn down Pryme Cleaning Wheels.
Always wear a dust mask or respirator and proper eye protection while buffing!
-Grinder tools not included
-Always wear a dust mask or respirator and proper eye protection while buffing!
Related Items:
Small pre cut wheels are available here.
Purchase the adapters separately here.
Tags: Cleaning, Pad, Wheel, Scuff, Scotch, Abrasive, Sanding, Drum, Dremel Attachment, Buff, Buffing, Die Grinder Attachment, Wheel Adapter, Adapter, Mandrel, Shank, Template, Drill, Chuck, Drill Attachment
The 1/8" adapter is designed to be used on a Dremel or 1/8" rotary tool.
The Dremel tool I recommend Click Here
Some cheaper alternatives:
Avid Rotary Tool Click Here
Tacklife Rotary Tool Click Here
The 1/4" adapter is designed to be used on an air die grinder or 1/4" rotary tool.
My recommended die grinder Click Here
Some cheaper alternatives:
Ingersoll Rand Grinder Click Here
Neiko Grinder Click Here
If you don't have an air compressor, here is a good electric die grinder Click Here
The drill adapter is recommended to be used on a high speed drill with a minimum of 2500 RPM, or could be used on a die grinder as well. Compatible with any wheel that has a 1/2" center hole, such as Pryme Cleaning Wheels. Recommended to be used with wheels 6" and smaller.
Recommended drills:
Genesis Drill Click Here
DeWalt Drill Click Here
Harbor Freight Drill Click Here
Whenever you're doing any sort of grinding or sanding you'll want to use eye and respiratory protection. Trust me, you do not want to be breathing in metal particles!
A great product for protecting yourself is this respirator Click Here
Alternatively, this is also a great respirator to pair up with safety glasses Click Here
Use these filters with the previously mentioned respirators Click Here
If you're doing lots of buffing, I'd recommend getting some sort of ventilation like this exhaust fan that I use Click Here
And of course, always a good idea to wear gloves Click Here
Installation
- Cut out desired wheel size from template, or mount pre cut wheel onto the adapter.
- Slide adapter shaft at least 3/4" into the tool, securely fasten, and get cleaning!
Buffing
- Use the rough wheels for scratch removal and aggressive sanding, use the fine wheels for a smooth, brushed type finish
- Remove as much grease, oil, and dirt as you can before using the wheels, so you’re not contaminating them.
- Sand or buff in the same direction if you’re going for a brushed look. Intersecting scratches do not look good.
- Try to buff evenly across the part so you don't end up with dips or low spots.
- Use light pressure with the wheel or you'll wear it out prematurely. If you need to apply heavy pressure, you should go to a more aggressive wheel. Refer to buffing chart below.
- In order to make the wheels last as long as possible, stay away from sharp edges. The direction of the wheel should be spinning away from an edge and not towards it.
- Refer to the buffing chart below for the proper wheels to use with each metal type, as well as the steps to achieve the desired finish.
- If you have problems achieving a good finish, refer to the troubleshooting guide below.
- Always wear a dust mask or respirator and eye protection while buffing!
After Buffing:
- A clear ceramic coating will protect your part after buffing.
- Steel and magnesium parts must be protected with a coating, bare steel will rust quickly and magnesium corrodes in a matter of hours. Stainless steel and aluminum can be left bare without corrosion issues, as long as you keep the parts clean and out of the weather during storage.
- To achieve a consistent brushed look on larger parts, finish it by hand with a hand pad, going in the same direction you were buffing in.
Tracking Information Tracking numbers will be uploaded to the order page and sent to your email inbox. It may take up to 24 hours for the tracking page to show the most recent information.
We are not to be held responsible for stolen or lost packages, packages sent to the wrong address, or refunding/replacing packages in these scenarios. It is the customer's responsibility to file all shipping claims.
Returns We accept returns within 14 days after your item has been delivered. If 14 days have gone by since your item was delivered, unfortunately we cannot offer you a refund. To initiate a return please send us an email at sales@prymemx.com. To be eligible for a return, your item must be in the same condition that you received it. The item must be unused / unworn and original tags attached. No returns allowed on sale/clearance items.
Refunds Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. Your refund will be processed and a credit will automatically be applied to your credit card or original method of payment, within 7 days.
Late or Missing Refunds If you haven’t received a refund for your return yet, first check your bank account. Then contact your credit card company, it may take some time before your refund is officially posted. If you’ve done all of this and you still have not received your refund yet, please contact us at sales@prymemx.com.
Shipping Costs You will be responsible for paying the return shipping costs of your item. Additionally, the original shipping costs will not be refunded.
Exchanges If you need to exchange an item, please see our refund policy above and include exchange instructions with the return. We do not offer exchanges on out of stock items. If the item is out of stock then we will refund you instead. The buyer is responsible for all shipping costs on exchanges.
Incorrect or Defected Item If we made a mistake with your order, please contact us at sales@prymemx.com. We will provide a return label if an exchange needs to be made. You must notify us within 14 days of delivery of any defects with the item. Any claims past 14 days will be considered wear and tear, and cannot be replaced.
Customer Reviews
The products arrived quickly and were well packaged. They were in perfect condition and ready to use out of the box. The 8" wheels mounted directly on my buffer and I used them the same day to clean a Warm Up Regulator on 1978 911. The rough wheel easily removed casting marks and other nicks, while the fine wheel put a nice brushed finish on the part. I used the wheel adapter and small wheels to get to the tighter areas of the regulator. I'm very pleased with this product and I expect to use it a lot more in my restoration. Cam also included a hand written note thanking for my purchase, which was a nice touch these days.
Thanks for the detailed review Derrick! Your feedback is greatly valued. Looking forward to working with you again in the future.
i polish lots of honda mini trail engine cases along with brake and wheel hubs... these pads work great on what im trying to accomplish....always like the look of polished aluminium.... the mini abrasive pads work excellent for getting in tight spaces....
Incredible work Ken! Thanks for sharing those pictures, happy to hear the products have been helping on your projects. Your business is much appreciated!
Thank you cam for the great products and great service.
I use many different abrasives! But with this kit I can do a lot of things that would cost me way more in just different types of collets, chucks, pads, etc. I can clean ares quick and easy. Highly recommended!
Smartest thing I have ever seen!! Totally worth it
