- Description
- Video
- Fitment
- How To Use
The Pryme mini cleaning wheel kit is your go to for cleaning in tight areas where bigger wheels can't get to. This kit is available for either a dremel tool (1/8" shaft) or die grinder tool (1/4" shaft).
Includes tool adapter, 3 fine grade wheels, and 3 coarse grade wheels. Wheels come in sizes from 1" to 2" in diameter.
- Use the coarse wheels for scratch removal and aggressive sanding, use the fine wheels for a smooth, brushed type finish
- Works great for paint preparation too
- Best for aluminum, but can be used on steel, stainless steel, and brass with great results (steel and brass must be coated afterwards to prevent rust and corrosion).
- Tool adapter is machined from stainless steel and includes a low profile stainless mounting screw
- Proudly made in the USA
Fine Wheel Specs:
Bring your old parts back from the dead with a Pryme fine cleaning wheel. Cleans, brightens, and leaves behind a brushed type finish.
- Comparable to 400 grit sandpaper
- 3/8" thick
- Max RPM: 25,000
Coarse Wheel Specs:
For those of you looking to smooth out scratches, scrapes, or casting lines, the Pryme coarse grade wheel is the ticket! Also works great for removal of rust, corrosion, and paint.
- Comparable to 180 grit sandpaper
-
3/8" thick
- Max RPM: 25,000
Click on "Video" tab to see the kit in use.
-Dremel not included.
-Always wear a dust mask or respirator and proper eye protection while buffing!
Related Items:
Replacement Wheels
Click here to purchase the adapter separately.
Tags: Cleaning, Pad, Wheel, Scuff, Scotch, Abrasive, Sanding, Drum, Dremel Attachment, Buff, Buffing, Die Grinder Attachment, Wheel Adapter, Adapter, Mandrel, Shank, Template, Kit, Mini, Pack
The Dremel kit is designed to be used on a Dremel or rotary tool that uses a 1/8" shaft size.
The Dremel tool I recommend Click Here
Some cheaper alternatives:
Avid Rotary Tool Click Here
Tacklife Rotary Tool Click Here
The die grinder kit is designed to be used on an air die grinder or rotary tool that uses a 1/4" shaft size. Could be used on a drill as well. The best results will come with it on a die grinder.
My recommended die grinder Click Here
Some cheaper alternatives:
Ingersoll Rand Grinder Click Here
Neiko Grinder Click Here
If you don't have an air compressor, here is a good electric die grinder Click Here
Whenever you're doing any sort of grinding or sanding you'll want to use eye and respiratory protection. Trust me, you do not want to be breathing in metal particles!
A great product for protecting yourself is this respirator Click Here
Alternatively, this is also a great respirator to pair up with safety glasses Click Here
Use these filters with the previously mentioned respirators Click Here
If you're doing lots of buffing, I'd recommend getting some sort of ventilation like this exhaust fan that I use Click Here
And of course, always a good idea to wear gloves Click Here
Installation
- Install wheel onto adapter shaft and snug down mounting screw.
- Slide adapter shaft at least 3/4" into the tool, securely fasten, and get cleaning!
Buffing
- Use the rough wheels for scratch removal and aggressive sanding, use the fine wheels for a smooth, brushed type finish
- Remove as much grease, oil, and dirt as you can before using the wheels, so you’re not contaminating them.
- Sand or buff in the same direction if you’re going for a brushed look. Intersecting scratches do not look good.
- Try to buff evenly across the part so you don't end up with dips or low spots.
- Use light pressure with the wheel or you'll wear it out prematurely. If you need to apply heavy pressure, you should go to a more aggressive wheel. Refer to buffing chart below.
- In order to make the wheels last as long as possible, stay away from sharp edges. The direction of the wheel should be spinning away from an edge and not towards it.
- Refer to the buffing chart below for the proper wheels to use with each metal type, as well as the steps to achieve the desired finish.
- If you have problems achieving a good finish, refer to the troubleshooting guide below.
- Always wear a dust mask or respirator and eye protection while buffing!
After Buffing:
- A clear ceramic coating will protect your part after buffing.
- Steel and magnesium parts must be protected with a coating, bare steel will rust quickly and magnesium corrodes in a matter of hours. Stainless steel and aluminum can be left bare without corrosion issues, as long as you keep the parts clean and out of the weather during storage.
- To achieve a consistent brushed look on larger parts, finish it by hand with a hand pad, going in the same direction you were buffing in.
Tracking Information Tracking numbers will be uploaded to the order page and sent to your email inbox. It may take up to 24 hours for the tracking page to show the most recent information.
We are not to be held responsible for stolen or lost packages, packages sent to the wrong address, or refunding/replacing packages in these scenarios. It is the customer's responsibility to file all shipping claims.
Returns We accept returns within 14 days after your item has been delivered. If 14 days have gone by since your item was delivered, unfortunately we cannot offer you a refund. To initiate a return please send us an email at sales@prymemx.com. To be eligible for a return, your item must be in the same condition that you received it. The item must be unused / unworn and original tags attached. No returns allowed on sale/clearance items.
Refunds Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. Your refund will be processed and a credit will automatically be applied to your credit card or original method of payment, within 7 days.
Late or Missing Refunds If you haven’t received a refund for your return yet, first check your bank account. Then contact your credit card company, it may take some time before your refund is officially posted. If you’ve done all of this and you still have not received your refund yet, please contact us at sales@prymemx.com.
Shipping Costs You will be responsible for paying the return shipping costs of your item. Additionally, the original shipping costs will not be refunded.
Exchanges If you need to exchange an item, please see our refund policy above and include exchange instructions with the return. We do not offer exchanges on out of stock items. If the item is out of stock then we will refund you instead. The buyer is responsible for all shipping costs on exchanges.
Incorrect or Defected Item If we made a mistake with your order, please contact us at sales@prymemx.com. We will provide a return label if an exchange needs to be made. You must notify us within 14 days of delivery of any defects with the item. Any claims past 14 days will be considered wear and tear, and cannot be replaced.
Customer Reviews
Wheels are okay
Works like a dream and got here very fast. Thanks Cameron and team
Your feedback is greatly appreciated Baxter! Happy to hear the wheels are working well for you. Thanks for supporting Pryme!
Very fair price to make your crusty dirt bike parts look brand new again!!
Thanks for sharing your review Anthony! Happy to hear you're satisfied with the kit.
Mini Cleaning Wheel Kit
Thanks for the great review Dennis!
I just received another order from Pryme and am beyond pleased with the product and the customer service. Would highly recommend their product and love to see the videos of Cameron demonstrating how to use the products to achieve best results. Excellent!
Your feedback is greatly appreciated! It means a lot to hear you're happy with the product and shopping experience. Thanks for supporting Pryme!
