Pryme MX Flap Wheel - 6 Inch
Pryme MX Flap Wheel - 6 Inch
Pryme MX Flap Wheel - 6 Inch

6 Inch Fiber Flap Wheel

Regular price $35.00 Save $-35.00

Removing scratches has never been easier! If you're going for a custom look, the Pryme fiber flap wheel works great for sanding away casting lines too.

  • Best used for removing scratches and blending in casting marks
  • Creates a consistent finish, with very little waves or warping
  • Leaves behind a brushed look, can be further finished with Pryme Cleaning Wheels
  • Has fiber pad in between flaps of sandpaper for smooth material removal
  • Offered in 80 grit and 180 grit (use 80 for sanding out scratches and 180 for a smoother finish)
  • 6" diameter x 1" wide (can be used on 1/2", 5/8", and 3/4" buffer shafts, select your shaft size above)
  • Optimal RPM: 2000
  • Max RPM: 3600 (works great at 3600, but wears quicker at higher speeds)
  • Offered in 80 grit and 180 grit (use 80 for sanding out scratches and 180 for a smoother finish)
  • Best for aluminum, but can be used on steel, stainless steel, and brass with great results too
  • Includes flap wheel and wheel reducers
  • Sold individually or in a pack of 3
  • Proudly made in the USA

This wheel is similar to the traditional flap wheel, but the difference is that the traditional flap wheel sands more aggressively due to having more sandpaper flaps, and also lasts a bit longer, but alternatively does not give as consistent of a finish as this fiber wheel does. This wheel is more flexible and conforms to rounded edges better than the traditional flap wheel. Use the traditional wheel when you need to remove deep scratches and scrapes, and use this fiber flap wheel where a more consistent brushed finish is desired.

Buffer motor or stand not included
Always wear a respirator and proper eye protection while using wheels!
Check out the video below of the wheels in action.  Tags: Cleaning, Pad, Wheel, Scuff, Scotch, Abrasive, Sanding, Flap, Drum, Fiber, Buff, Buffing

These wheels are designed to be used on a buffing machine or bench grinder. They can be used on a machine with a 1/2", 5/8", or 3/4" shaft. For a buffing machine, you'll want at least a 1/2 HP motor that spins at 3450 or 3600 RPM. One with an extended shaft is best, so you have lots of clearance to buff your parts.

If you'll be doing lots of buffing, opt for a 3/4 HP motor. Also, a 2 speed (typically 1800/3600 RPM) machine offers more versatility and is a great option.

Personally, this is the machine I use (Baldor motor, will last a lifetime) Click Here

Some cheaper alternatives:

Eastwood Single Speed Click Here

Eastwood Dual Speed Click Here

Great Economy Buffer Click Here

If you have an existing machine but need the big washers that hold the wheels on Click Here

If you need spacers for the wheel Click Here

To extend the shaft on your buffer Click Here

To use the wheels on a drill Click Here

Lastly, whenever you're doing any sort of grinding or sanding you'll want to use eye and respiratory protection. Trust me, you do not want to be breathing in metal particles!

A great product for protecting yourself is this respirator Click Here

Alternatively, this is also a great respirator to pair up with safety glasses Click Here

Use these filters with the previously mentioned respirators Click Here

If you're doing lots of buffing, I'd recommend getting some sort of ventilation like this exhaust fan that I use Click Here

And of course, always a good idea to wear gloves Click Here


  • Secure wheel to buffer shaft with the sandpaper facing the direction the wheel will be spinning. Mount wheel with an adapter flange on either side. Make sure the lip of the flange is facing in towards the wheel.
  • Tighten down the nut until the wheel is secure on the shaft and doesn’t spin (use a spacer if your nut bottoms out on the threads).


  • Try to sand or buff in the same direction, try to buff in the length of the part. Intersecting scratches do not look good.
  • Use light pressure with the wheel or you'll wear it out prematurely. If you need to apply heavy pressure, you’ll need to go to a more aggressive wheel.
  • Buffing against the direction the wheel is spinning will cut quicker, buffing with the spinning of the wheel will give a smoother finish.
  • In order to make the wheels last as long as possible, stay away from sharp edges. The direction of the wheel should be spinning away from an edge and not towards it. Adjust the orientation of the part accordingly. 
  • To achieve a consistent brushed look on larger parts, finish by hand with a fine cleaning wheel, going in the same direction you were buffing in.
  • Always wear a respirator and eye protection when using the wheels!

-Not sure what wheel you need? Use the Wheel Guide

Pryme ships to any country in the world, please add your items to the shopping cart to see shipping rates.
U.S orders over $50 ship free!
Handling Time Orders ship out within 1 business day of receiving cleared payment. We do not ship on Sundays or holidays.
    International Buyers are responsible for any import duty or taxes. Sorry, we cannot mark the value of the package down or send it as a gift. Occasionally, packages may be held up in customs for a period of days or weeks.

      Tracking Information Tracking numbers will be uploaded to the order page and sent to your email inbox. It may take up to 24 hours for the tracking page to show the most recent information.

      We are not to be held responsible for stolen or lost packages, packages sent to the wrong address, or refunding/replacing packages in these scenarios. It is the customer's responsibility to file all shipping claims.

        Returns We accept returns within 14 days after your item has been delivered. If 14 days have gone by since your item was delivered, unfortunately we cannot offer you a refund. To initiate a return please send us an email at To be eligible for a return, your item must be in the same condition that you received it. The item must be unworn/unwashed and original tags attached. We cannot accept returns on items with human/animal hair, or that smell of smoke, cologne, or deodorant. No returns allowed on sale/clearance items.

        Refunds Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund. If you are approved, your refund will be processed and a credit will automatically be applied to your credit card or original method of payment, within 7 days. 

        Late or Missing Refunds If you haven’t received a refund for your return yet, first check your bank account. Then contact your credit card company, it may take some time before your refund is officially posted. If you’ve done all of this and you still have not received your refund yet, please contact us at

        Shipping Costs You will be responsible for paying the return shipping costs of your item. Additionally, the original shipping costs will not be refunded.

        Exchanges If you need to exchange an item, please see our refund policy above and include exchange instructions with the return. We do not offer exchanges on out of stock items. If the item is out of stock then we will refund you instead. The buyer is responsible for all shipping costs on exchanges.

        Incorrect or Defected Item If we made a mistake with your order, please contact us at We will provide a return label if an exchange needs to be made. You must notify us within 14 days of delivery of any defects with the item. Any claims past 14 days will be considered wear and tear, and cannot be replaced.

        Customer Reviews

        Based on 2 reviews
        Incredible service
        Thanks for your review William! Your purchase is greatly appreciated.
        Pretty Trick